Product ID:27925 WHITE S/G AIR DRY ENAMEL WOOD & METAL,(SUP DAT)
MSDS Date:05/11/1994
FSC:1440
NIIN:LWW013969
MSDS Number: BXCRT

RANDOLPH PRODUCTS CO

701 12TH ST
CARLSTADT, NJ 07072-0830
US

Emergency Phone: 800-255-3924

Info Phone: 201-438-3700

Preparer: SU

Cage: 77672

RANDOLPH PRODUCTS CO

830 CARLSTADT, NJ 07072-0830 US

Telephone: 201-438-3700

Cage: 77672

AREA AND IGNITION SOURCES SHOULD BE ELIMINATED.

RTECS: 9999999ZZ

PERMISSIBLE EXPOSURE LIMIT OR ACGIH'S TLV LIMT.

RTECS: 9999999ZZ

MEDIUM OIL ALKYD RESIN

Fraction By Weight: 30%

OSHA PEL 100 PPM

ACGIH TLV: 150 PPM

STODDARD SOLVENT; (ALIPHATIC NAPHTHA)

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 40%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

SPILL. CLEAN SPILL WITH BRISTLE BROOMS,

RTECS: 9999999ZZ

EPA HAZARDOUS WASTE CODE F003 HAZARDOUS

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC HEALTH EFFECTS ARE POSSIBLE
FROM LONG TERM EXPOSURE TO MATERIAL, INCLUDING DRYING, CRACKING, &
IRRITATION OF THE SKIN. REACTS WITH SKIN PROTEIN & MOISTURE & CAN
CAUSE RASH, SCALING/BLISTERING. HIGH CONCENTRATIONS MAY CAUSE
HEADACHES & DIZZINESS, ARE ANESTHETIC, AND MAY HAVE OTHER CNS
EFFECTS, INCLUDING DEATH.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT. CONTACT LENS WEARERS SHOULD CONSULT PROVIDER BEFORE
HANDLING. CONSULT MD IMMED IF THERE IS EYE CONT.

First Aid:INHAL: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT MD.
SKIN: FLUSH WITH WATER. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS
OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD. INGEST: CALL MD
IMMEDIATELY .

Flash Point Method:SCC
Flash Point:40.0F,4.4C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER STREAM WILL SPREAD FIRE. DO NOT USE
WATER HOSE STREAM.
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLOSED. ISOLATE FROM
HEAT, SPARKS, & OPEN FLAME. CLOSED CONTRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. WATER MAY BE USED TO COOL (SUP DAT)

Spill Release Procedures:AVOID BRTHG SOLV VAP. ENSURE ADEQ VENT. AVOID
SPARKS, FLAMES & ANYTHING THAT COULD CAUSE FIRE. ELIMINATE SOURCE
OF SPILL IF YOU CAN DO SO W/OUT RISK BY CLOSING VALVE, PLUGGING
HOLE, ETC. APPLY ABSORB INERT MATL (SAND, DUST, VERMICULITE)
TO(ING 3)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DRUMS SHOULD BE GROUNDED WHEN BEING
EMPTIED.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.

Respiratory Protection:USE OF NIOSH/MSHA APPRVD RESP TYPES RECOMMENDED.
APPRVD CHEM/MECH FILTERS RECOMMENDED WHEN VENT IS RESTRICTED. PREC
MUST BE TAKEN SO THAT PERS DO NOT BREATHE VAPS/HAVE CONT
W/EYES/SKIN. PROTECT AGAINS T EXPOS TO BOTH VAP & SPRAY MIST.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAMINATION BELOW CURRENT APPLICABLE OSHA (ING 5)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:USE NORMAL HYGIENE PRACTICES DURING AND AFTER
HANDLING THIS MATERIAL.
Supplemental Safety and Health
TRADE NAME/PART NO: 529F-1-27925. EXPLO HAZ: CLOSED CONTRS TO PREVENT
PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.
REMOVE ALL NON-ESSENTIAL PERS FROM FIRE AREA. VAP IS HVR/AIR & CAN
TRAVEL CONSIDERABLE DISTANCES TO SOURCE OF IGNIT & FLASHBACK.

Boiling Pt:B.P. Text:>305F,>152C
Vapor Density:HVR/AIR
Spec Gravity:1.22
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:THIN WHITE LIQUID WITH TYPICAL SOLVENT ODOR
Percent Volatiles by Volume:57.1

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID STRONG OXIDIZERS, ACIDS, AND
ALKALIES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION RELEASES CARBON
MONOXIDE AND/OR CARBON DIOXIDE.

Waste Disposal Methods:SOAK LIQ W/SAWDUST/RAGS & REMOVE. FLUSH W/WATER
IF POSS. AVOID SKIN CONT. DISP SHOULD BE I/A/W LOCAL, STATE, &
FEDERAL REGS. DO NOT INCIN, CUT/WELD EMPTY CONTRS. WHEN DISCARDED
THIS MATL IS HAZ WASTE. TRANSFER LIQ TO CONTRS FOR RECOVERY/DISP.
(ING 4)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.